Disassemble Governor Start By: a. remove fuel injection pump housing and governor 1. Install the fuel injection pump housing on Tool (A) as shown. 2.…

Remove Fuel Transfer Pump Start By: a. remove fuel injection pump housing and governor Fluid Spillage Containment Care must be taken to ensure that fluids…

Remove Fuel Injection Pump Housing & Governor Start By: a. remove fuel injection lines b. remove air inlet manifold c. remove fan drive Fluid Spillage…

Remove Automatic Timing Advance start by: a) remove timing gear cover and oil pump 1. Remove the plug from the fuel injection pump housing and…

Remove Fuel Injection Pumps NOTICE Before any service work is done on the fuel system, the outer surface of the injection pump housing must be…

Disassemble Fuel Injection Pump Housing start by: a) remove fuel injection pumps b) separation of governor from fuel injection pump housing c) remove fuel transfer…

Remove Fuel Injection Pump Housing And Governor start by: a) remove fuel lines b) remove air inlet manifold NOTICE Make sure all foreign material is…

(1) Torque for the bolt that holds the drive gear to the camshaft of the injection pump … 149 ± 14 N·m (110 ± 10…

(1) Bypass valve: Fuel pressure at FULL LOAD … 205 ± 35 kPa (30 ± 5 psi) (2) 4N0605 Spring for bypass valve: Length under…

(5) Torque for bolts that hold governor weight carrier to camshaft … 10 ± 1 N·m (90 ± 9 lb in)