Remove Engine Oil Cooler & Oil Filter Base Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection,…
Tag: engine
Remove Pistons & Connecting Rod Assemblies Start By: a. remove cylinder head assemblies b. remove oil pan 1. Remove the carbon from the top inside…
Remove & Install Connecting Rod Bearings Start By: a. remove oil pan 1. Turn the crankshaft until two pistons are at bottom center. Remove connecting…
Remove Pistons start by: a) remove cylinder heads b) remove oil pan 1. Remove the carbon from the top inside surface of the cylinders with…
Remove And Install Connecting Rod Bearings start by: a) remove oil pan 1. Turn the crankshaft until two pistons are at bottom center. Remove connecting…
9Y6771 And 121-4695 Piston Group (Three Ring Piston) (1) Connecting rod. Connecting rods and caps to be marked (by etching only) with the number of…
(1) Bore in bearing for piston pin … 38.135 ± 0.008 mm (1.5014 ± .0003 in) (2) Bore in connecting rod for bearing [when tightened…
Reference: Make reference to GUIDELINE FOR REUSABLE PARTS; PISTONS AND CYLINDER LINERS, Form No. SEBF8001. NOTE: 9L6233 Top Ring (1) has the mark “UP-1.” *…
(1) Bore in bearing for piston pin … 1.5010 ± .0003 in.(38.125 ± 0.008 mm) (2) Bore in connecting rod for bearing [when tightened according…
Remove Oil Pan Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair…