Illustration 1 g00765050 The electronic control system is integrally designed into the engine’s fuel system and the engine’s air inlet and exhaust system in order…
Tag: C15
Active Diagnostic Code – An Active Diagnostic Code describes a condition that is currently present in order to alert the operator or the service technician…
The following model views show typical C-15 and C-16 Engine features. Due to individual applications, your engine may appear different from the illustrations. Illustration 1…
System Operation Description: There are two options for calibrating the throttle position sensor: Mechanical Calibration – During a manual calibration, two set screws on the…
System Operation Description: If any of the following conditions have occurred, calibrate the injector trim codes: Replacement of the Electronic Control Module (ECM) Replacement of…
System Operation Description: Use this procedure if the diagnostic code in Table 1 is active. Table 1 Diagnostic Codes Table Description …
System Operation Description: The warning lamp is a maintenance indicator that is based on the PM levels that are programmed into the Electronic Control Module…
System Operation Description: The throttle position sensor (TPS) eliminates the mechanical throttle and governor linkages. The TPS utilizes the lever movement by the operator to…
System Operation Description: Use the following diagnostic procedures in order to diagnose problems with the switch circuits and repair the switch circuits that are shown…
System Operation Description: Table 1 Parameter Alternative Default “PTO mode” “PTO mode 2” “PTO mode…