1. Remove the fuel from the fuel injection pump housing. Install the fuel injection pump housing and governor on tool (A). 2. Remove five bolts…
Category: 3306
Remove And Install Service Meter 1. Remove two bolts (3), clamps (2) and service meter (1) from the governor housing. 2. Inspect the O-ring seal…
1. Put the fuel injection pump housing on tool (A). 2. Install timing pin (B) to hold the camshaft so it will not turn. 3.…
start by: a) remove fuel injection pump housing and governor b) remove adapter housing c) remove service meter group 1. Put the fuel injection pump…
1. Inspect the transfer pump housing O-ring seal for damage. Make a replacement if necessary. 2. Put the fuel injection pump housing and governor (1)…
start by: a) remove electric starting motor b) remove fuel injection lines 1. Remove two bolts (1) and start switch (2) from the governor housing.…
Remove Adapter Housing And Levers start by: a) remove fuel ratio control NOTE: The fuel injection pump housing and governor does not have to be…
Remove And Install Fuel Ratio Control 1. Disconnect pressure line (2) from the fuel ratio control. 2. Remove lockwires (3). 3. Remove two bolts (4)…
Remove Electric Starting Motor 1. Put identification on the wires for the starting motor as to their location on the starting motor. Disconnect wires (1)…
Remove Alternator (Industrial Engine) 1. Disconnect and put identification on all alternator wires (1). 2. Remove bolt (2) that holds the alternator to the timing…