Removal Procedure Illustration 1 g00630032 Illustration 2 g00629985 Remove plug (1) and the O-ring seal from the engine oil filter base. Remove valve spring (2)…
Category: 3126
Installation Procedure Illustration 1 g01026328 Illustration 2 g01185803 Position the gasket and engine oil filter base (3) over the engine oil cooler. Install the bolts…
Assembly Procedure Illustration 1 g01011627 Install O-ring seals (5) onto plugs (1) and (3). Install valves (6) and springs (4) . Illustration 2 g01011623 Install…
Disassembly Procedure Start By: Remove the engine oil filter base. Refer to Disassembly and Assembly, “Engine Oil Filter Base – Remove”. Illustration 1 g01011623 Remove…
Removal Procedure Note: Remove the turbocharger, if necessary. Refer to Disassembly and Assembly, “Turbocharger – Remove”. Illustration 1 g01026328 Remove oil filter assembly (1) with…
Typical Example (1) Oil filter bypass valve to open at … 125 ± 30 kPa (18 ± 4.5 psi) 9L9188 Spring for bypass valve: Outside…
(1) Bolt. Tighten bolts to a torque of … 7 ± 2 N·m (62 ± 18 lb in) (2) Fuel filter base.
Removal Procedure Illustration 1 g01181229 Disconnect tube assembly (1) from fuel pressure regulator (2) . Remove fuel pressure regulator (2) from the cylinder head. Installation…
Installation Procedure Illustration 1 g00644693 Position gear (9) and the washer on the unit injector hydraulic pump. Install bolt (8). Tighten the bolt to a…
Removal Procedure Start By: Remove the fuel transfer pump. Refer to Disassembly and Assembly, “Fuel Transfer Pump – Remove”. Remove the injection actuation pressure control…