Illustration 1 g01431260 Typical Example Illustration 2 g00285630 Tightening Sequence For Valve Cover And Base Note: Apply 4C-4030 Thread Lock Compound to the bolts that…

Illustration 1 g00859782 (1) Valve rocker arm assembly (2) Valve lash Inlet valves … 0.38 ± 0.08 mm (0.015 ± 0.003 inch) Exhaust valves ……

Illustration 1 g00287811 (1) Ball (2) Diameter of rocker arm shaft … 40.000 ± 0.010 mm (1.5748 ± 0.0004 inch)

Illustration 1 g01431248 (1) Bearing joint (A) Bore in the rocker arm bearing for the rocker arm shaft New parts … 40.065 ± 0.015 mm…

Remove Pistons & Connecting Rod Assemblies Start By: a. remove cylinder head assembly b. remove oil pump Fluid Spillage Containment Care must be taken to…

Refer to Guideline for Reusable Parts, SEBF8049, “Pistons” and Guideline for Reusable Parts, SEBF8051, “Piston Pins and Retaining Rings”. Illustration 1 g00514913 Thoroughly lubricate the…

Refer to Special Instruction, SMHS7366, “Using the 5P-2050 Connecting Rod Checking Fixture ” for information on checking and on reconditioning connecting rods. Also refer to…

Remove & Install Oil Pan Fluid Spillage Containment Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting…

Illustration 1 g00381492 Front sump Illustration 2 g00381512 Rear sump (1) Apply 9S-3263 Thread Lock Compound to the plug. Tighten the plugs to the following…

Remove & Install Engine Front Support Typical Example 1. Support the engine. 2. Remove bolts (1), and remove engine support (2). NOTE: The following step…