The wiring schematics are revised periodically. The wiring schematics will change with updates to the harness wire. For the most current information, always check the…
Author: sam
Table 1 Connector Function J1/P1 ECM Connector (70-Pin Engine Harness) J2/P2 ECM Connector (70-Pin Engine…
The Electronic Control Module (ECM) has the ability to detect problems with the electronic system and with engine operation. When a problem is detected, a…
NOTICE Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared…
Service Tools Most of the tools that are listed in Table 1 are required to enable a service technician to perform the test procedures in…
System Operation This engine was designed for electronic control. The injection pump, the fuel lines and the nozzles that are used in mechanical engines have…
6T7337, 6T7568, And 7T8579 Service Meters (1) Tighten two nuts on back to a torque of … 0.40 ± 0.08 N·m (4 ± 1 lb…
2W3687 Indicator
(1) Magnetic pickup terminals. (2) Calibration control (under plug): Tighten plug to a torque of … 0.6 ± 0.1 N·m (5 ± 1 lb in)…