Removal Procedure
Illustration 1 g00629979
Illustration 2 g00629985
1.Remove plug (1) and the O-ring seal from the engine oil cooler.
2.Remove valve spring (2) and bypass valve (3) from the engine oil cooler.
Installation Procedure
Illustration 3 g00629985
Illustration 4 g00629979
1.Inspect the condition of the O-ring seal. Replace the seal, if necessary.
2.Install bypass valve (3) and valve spring (2) in the engine oil cooler.
3.Install plug (1) in the engine oil cooler.