C7 Industrial Engines Disassembly and Assembly – Piston Cooling Jets – Remove and Install

Removal Procedure

Start By:

Remove the engine oil pan. Refer to Disassembly and Assembly, “Engine Oil Pan – Remove and Install”.

1. Remove bolt (2) and piston cooling jet (1) from each cylinder.

Installation Procedure

1. Position piston cooling jet (1) in the cylinder block. Install bolt (2) . Tighten the bolt to a torque of 28 ± 7 N·m (21 ± 5 lb ft).

End By: Install the engine oil pan. Refer to Disassembly and Assembly, “Engine Oil Pan – Remove and Install”.