C7 Industrial Engines Disassembly and Assembly – Fuel Priming Pump – Remove and Install

Removal Procedure

 

 


NOTICE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, “Caterpillar Dealer Service Tool Catalog” for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.


 

 


NOTICE
Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.


 

  1. Remove bolts (2) and the washers.

 

  1. Remove fuel priming pump (3) and the gasket from fuel filter base (1) .

Installation Procedure

 

 


NOTICE
Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

 

  1. Position the gasket and fuel priming pump (3) on fuel filter base (1) .

 

  1. Install bolts (2) and the washers.

 

  1. Purge the air from the fuel system.
Posted in C7

Leave a Reply

Your email address will not be published. Required fields are marked *