D330, D333, 3304, 3306 – Fuel Injection Pump Operation


FUEL INJECTION PUMP HOUSING AND PUMP CROSS SECTION
1. Fuel manifold. 2. Inlet port. 3. Check valve. 4. Gear segment. 5. Pump plunger. 6. Spring. 7. Fuel rack. 8. Lifter. 9. Camshaft.

The injection pump plungers and the lifters are lifted by lobes on the camshaft and always make a full stroke. The lifters are held against the cam lobes by springs.

The amount of fuel pumped each stroke is varied by turning the plunger in the barrel. Action of the governor moves the fuel rack which turns the pump gear segment on the bottom of the pump plunger.

Leave a Reply

Your email address will not be published. Required fields are marked *