7C6032 Flywheel Housing
NOTE: Be sure the contact surfaces of the flywheel housing and the cylinder block are clean and free of any foreign material. Clean the contact surfaces with 4C4079 Solvent Cleaner. Apply 1U8846 Gasket Maker on the contact surface of the flywheel housing. A 1.5 mm (.06 in) bead of 1U8846 Gasket Maker down the middle of the contact surface and around each bolt hole. Spread the bead of gasket maker into a thin even thickness over the contact surface.
NOTE: Apply of 9S3263 Thread Lock on all bolt threads prior to installation.
(1) Bolts (two). Tighten to a torque of … 120 ± 20 N·m (88 ± 15 lb ft)
(2) Bolts (eight). Length … 28.58 mm (1.125 in)
Tighten to a torque of … 50 ± 10 N·m (38 ± 7 lb ft)
(3) Bolts (two). Length … 44.45 mm (1.750 in)
Tighten to a torque of … 50 ± 10 N·m (38 ± 7 lb ft)
(4) Plugs (two). Tighten to a torque of … 5 ± 2 N·m (44 ± 18 lb in)
4W1957 Flywheel Housing
NOTE: Be sure the contact surfaces of the flywheel housing and the cylinder block are clean and free of any foreign material. Clean the contact surfaces with 4C4079 Solvent Cleaner. Apply 1U8846 Gasket Maker on the contact surface of the flywheel housing. A 1.5 mm (.06 in) bead of 1U8846 Gasket Maker down the middle of the contact surface and around each bolt hole. Spread the bead of gasket maker into a thin even thickness over the contact surface.
Tighten both flywheel housing plugs to a torque of … 5 ± 2 N·m (44 ± 18 lb in)