Typical Example
Refer to the topic, Flywheel Runout, for the correct method of flywheel inspection.
(1) Apply 9S3263 Thread Lock to the threads of bolts holding the flywheel to the crankshaft. Tighten bolts to a torque of … 125 ± 10 N·m (90 ± 7 lb ft)
(2) Ring gear. Install with Part No. on this side. Ring gear must be assembled against shoulder (A) of flywheel. Maximum temperature of ring gear before installing on flywheel (do not use a torch) … 204°C (400°F)