Valve Mechanism Cover – Remove and Install Removal Procedure Illustration 1 g00820158 1.Remove the bolts that hold valve mechanism cover (1) to valve mechanism cover…
Tag: valve
Valve Cover Bolts Tightening Sequence Tighten valve cover bolts in sequence shown to a torque of … 12 ± 3 N·m (9 ± 2 lb…
(1) Bore in rocker arm for shaft (new) … 24.808 ± 0.020 mm (0.9767 ± 0.0008 in) Diameter of shaft (new) … 24.755 ± 0.010…
Removal Procedure Table 1 Required Tools Tool Part Number Part Description Qty A (1) …
Removal Procedure Start By: A.Remove the inlet valves and the exhaust valves. Refer to Disassembly and Assembly, “Inlet and Exhaust Valves – Remove and Install”.…
Removal Procedure Start By: A.Remove the cylinder head assembly. Refer to Disassembly and Assembly, “Cylinder Head – Remove”. Note: For information on the reusability of…
Installation Procedure 1.Inspect the injector sleeve for pitting and for carbon tracking. Used injector sleeves do not need to be reamed unless the seated…
NOTE: Intake and exhaust valve stems are to be coated with engine oil prior to installation in the cylinder head. NOTE: Intake and exhaust valve…