The following procedure is used in order to perform the no-load test after the starting motor has been repaired. The test should also be performed…

37-MT Starting Motors (12 Volt Systems) Illustration 1 g00810014 Connections for pinion clearance check for 12 volt system (1) Battery (2) Starting motor (3) Solenoid…

Brush Holder Test Illustration 1 g00800898 Typical example of a brush holder test (6) Brush spring (7) Brush holder (8) Brush holder plate 1.Check the…

Note: The graphics that are illustrated in this section refer to the solenoids that are 24 VDC. Solenoids that are 12 VDC use the same…

General Information Illustration 1 g00710932 Rest position (1) Return spring (2) Solenoid assembly (3) Pull-in winding (4) Start terminal “S” (5) Hold-in winding (6) Battery…

llustration 1 g00709948 Starting motor components (1) Rear frame assembly (2) Solenoid assembly (3) Plunger assembly (4) Shift lever housing (5) Shift lever assembly (6)…

Illustration 1 g00712156 50-MT series starting motor The 50-MT series starting motor may be ordered in the following versions: 24 volt, 32 volt and 64…

General Information Illustration 1 g00719183 Rest Position (1) Return Spring (2) Solenoid (3) Pull-In Winding (4) Start (S) Terminal (5) Hold-In Winding (6) Battery (Bat)…

Illustration 1 g00718697 (1) Rear Housing (2) Solenoid (3) Plunger (4) Shift Lever Housing (5) Shift Lever (6) Drive Housing (7) Pinion Drive (8) Brushes…

Illustration 1 g00717738 42-MT Starting Motor The heavy-duty starting motors are offered in 24Vand 12V versions. The 37-MT and 41-MT are similar in operation and…