System Operation Description: The possible causes of this failure are listed below: •The flywheel ring gear is damaged. •The shift lever is damaged. •The pinion…
Tag: starting motor
System Operation Description: The possible causes of this failure are listed below: •The battery is discharged or the battery is faulty. •The cables to the…
System Operation Description: The possible causes of this failure are listed below: •The battery is discharged or the battery is faulty. •The cables to the…
System Operation Description: The possible causes of this failure are listed below: •The battery is discharged or the battery has failed. •The cables to the…
When the solenoid is installed, make an adjustment of the pinion clearance. The adjustment should be made with the starting motor removed. Illustration 1 g00716453…
Illustration 1 g00716393 Pinion drive check (9) Pinion housing (10) Pinion 1.Visually inspect the overrunning clutch of the pinion drive assembly for damage. 2.Hold housing…
Brush Holder – Test Illustration 1 g00716313 Brush holder test (6) Brush spring (7) Brush holder (8) Brush holder plate 1.Check the brush springs (6)…
Illustration 1 g00716053 Armature short circuit check (3) Armature assembly (A) Growler tester 1.Place armature (3) on growler tester (A). The tester needs to be…
Illustration 1 g00715885 Field winding ground test (1) Field winding leads (2) “Mtr” Motor terminal Note: A visual check of the field windings should be…
Illustration 1 g00713118 Basic solenoid circuit A basic four terminal starting motor solenoid circuit is shown in Illustration 1. The two windings that are found…