Remove Crankshaft And Gear start by: a) remove flywheel housing b) remove valve lifters c) remove pistons d) remove timing gear cover and oil pump…

Remove Crankshaft Rear Seal And Wear Sleeve start by: a) remove flywheel 1. Remove the crankshaft rear seal from the flywheel housing with tooling (A).…

Remove Crankshaft Front Seal start by: a) remove crankshaft pulley 1. Remove the front seal with tool group (A). Install Crankshaft Front Seal 1. Put…

Remove Crankshaft Pulley 1. Remove the vee belts from the front of the engine. 2. Remove bolt (1) and washer (2) from the crankshaft. 3.…

Remove And Install Crankshaft Main Bearings start by: a) remove oil pan 1. Check each main bearing cap for its location on the engine. Each…

Heat gear to install. Do not heat to a temperature of more than 260°C (500°F). (1) Endplay for the crankshaft … 0.08 to 0.30 mm…

9N0542 Crankshaft Seal Group (1) 7C6660 Hydrodynamic Seal Group. (2) 7W3200 Hydrodynamic Seal Group. (A) The distance from the edge of 7C6660 Hydrodynamic Seal Group…

Heat gear to install. Do not heat to a temperature of more than 500°F (260°C). (1) End play for the crankshaft … .003 to .010…

2N1373 A force (F) of 525 to 695 N (118 to 156 lb) must be necessary to engage the clutch. The force must be at…

2N1373 CLUTCH A force (F) of 118 to 156 lbs. (525 to 695 N) must be necessary to engage the clutch. The force must be…