Remove & Install Governor & Fuel Pump Drive Start By: a. remove timing gear cover & oil pump 1. Remove the plug from the fuel…
Tag: 3208
Remove Fan Drive 1. Remove the fan from the fan drive. 2. Release the tension on the fan belts by loosening nuts (1) on the…
Install the damper assembly on the crankshaft until the hub of the damper assembly comes in contact with the gear on the crankshaft. DO NOT…
Install the damper assembly on the crankshaft until the hub of the damper assembly comes in contact with the gear on the crankshaft. DO NOT…
Remove Cylinder Head Assemblies Start By: a. remove exhaust manifold b. remove air inlet manifold c. remove fuel injection lines d. remove fuel injection nozzles…
Remove Cylinder Heads start by: a) remove exhaust manifold b) remove air inlet manifold c) remove fuel injection lines d) remove fuel injection nozzles 1.…
(1) Put 6V4876 Molykote Lubricant on bolt threads and tighten bolts according to the Head Bolt Torque Chart that follows: Illustration 1. Bolt head identification.…
Inlet Valve (1) Diameter of the valve seat insert … 54.610 ± 0.013 mm (2.1500 ± .0005 in) Bore in head for valve seat insert…
HEAD BOLT LOCATION AND TIGHTENING SEQUENCE (1) Put engine oil on bolt threads and tighten bolts according to the procedure that follows: 1. Tighten bolts…
Intake Valve (1) Diameter of the valve seat insert … 2.1500 ± .0005 in.(54.610 ± 0.013 mm) Bore in head for valve seat insert ……