Removal Procedure Start By: Remove the engine oil pan. Refer to Disassembly and Assembly, “Engine Oil Pan – Remove and Install”. Note: For information on…
Tag: 3126
All steps of this procedure must be followed for the pressure findings to be usable. 1. Be sure that the engine is filled to the…
Section View Through Pump Gears (Typical Example) Section View Through Bypass Valve (1) Distance between outside face of gear and joint face of body ……
Removal Procedure Illustration 1 g00630032 Illustration 2 g00629985 Remove plug (1) and the O-ring seal from the engine oil filter base. Remove valve spring (2)…
Installation Procedure Illustration 1 g01026328 Illustration 2 g01185803 Position the gasket and engine oil filter base (3) over the engine oil cooler. Install the bolts…
Assembly Procedure Illustration 1 g01011627 Install O-ring seals (5) onto plugs (1) and (3). Install valves (6) and springs (4) . Illustration 2 g01011623 Install…
Disassembly Procedure Start By: Remove the engine oil filter base. Refer to Disassembly and Assembly, “Engine Oil Filter Base – Remove”. Illustration 1 g01011623 Remove…
Removal Procedure Note: Remove the turbocharger, if necessary. Refer to Disassembly and Assembly, “Turbocharger – Remove”. Illustration 1 g01026328 Remove oil filter assembly (1) with…
Typical Example (1) Oil filter bypass valve to open at … 125 ± 30 kPa (18 ± 4.5 psi) 9L9188 Spring for bypass valve: Outside…
(1) Bolt. Tighten bolts to a torque of … 7 ± 2 N·m (62 ± 18 lb in) (2) Fuel filter base.