Removal Procedure 1.Use a breaker bar to release the tension on belt tensioner (1). Remove the drive belt. 2.Remove bolt (2) and belt tensioner (1)…
Tag: 3116
Installation Procedure 1.Position idler pulley (3). Install bolt (2) and tighten bolt (2) to a torque of 55 ± 10 N·m (40 ± 7 lb…
Assembly Procedure 1.Use Tooling (B) to install one retaining ring (2) in idler pulley (4) . 2.Install bearings (3) in idler pulley (4) with Tooling…
Disassembly Procedure Start By: A.Remove the idler pulley. Refer to Disassembly and Assembly, “Idler Pulley – Remove”. 1.Remove spacer (1) and bolt (5) from idler…
1.Remove cover (1) from the idler pulley. Cover (1) will be damaged during removal. 2.Remove bolt (2) and idler pulley (3) .
Idler Pulley Assembly (1) Distance from back of plate assembly (3) to middle of pulley (4) … 26.0 ± 0.3 mm (1.02 ± 0.012 in)…
Start By: A.Remove the air compressor. Removal Procedure 1.Temporarily install air compressor (1) with bolts (2) . Remove cover plate (3) 2.Loosen nut (2) .…
Removal Procedure 1. Remove the air pressure from the air tank and drain the coolant from the cooling system. Remove the air line from the…
(1) Air compressor. (2) Bolt. Mounting procedure for air compressor: a. Tighten four bolts (2 and 4) finger tight. b. Tighten four bolts to ……
Installation Procedure 1.Inspect the turbocharger gasket for wear or damage. If the turbocharger gasket is worn or damaged, use a new part for replacement. 2.Apply…