1. Release clamp and remove cover assembly (1) from body assembly. 2. Remove air cleaner element from body assembly. 3. Remove two bolts (2) that…

1. Install the bearing assemblies and spacer on shaft with a press. The distance (X) must be 1.17 in. (29.7 mm) after assembly. 2. Install…

start by: a) remove sea water pump 1. Remove pump drive gear nut and washer. 2. Remove the drive gear from the shaft. Remove the…

1. Install bearing on shaft. Install the snap ring that holds it. 2. Install seal in bearing housing with tool (A). The lip of the…

start by: a) remove sea water pump 1. Make a separation between the bearing housing (4) and pump body (3) after removing bolts (2). 2.…

1. Install the sea water pump and nuts. 2. Connect the sea water inlet line. 3. Connect the sea water outlet line.

1. Disconnect sea water inlet line (4). 2. Disconnect sea water outlet line (2). 3. Remove four nuts (1) and remove sea water pump (3).