Refer to the appropriate system or engine harness schematics if a troubleshooting procedure instructs to “ANALYZE AND REPAIR THE HARNESSING”. Continuity checks and resistance checks…

Test Step 1. Perform the Alternator Output Test. Results: OK – The alternator is normal. Stop.

System Operation Description: The alternator is an electronic component that is belt driven. The alternator is used to charge the storage battery during engine operation.…

The following service tools should be used to aid in the troubleshooting of the alternator charging system. Table 1 Service Tools     Part Number…

Often when problems with the charging system are being investigated, the alternator is not the problem. If a low battery condition is present, test the…

System Operation Description: The possible causes of this failure are listed below: The battery is discharged or the battery is faulty. The cables to the…

System Operation Description: The possible causes of this failure are listed below: The battery is discharged or the battery has failed. The cables to the…

Table 1 Tools Needed     6V-7070 Digital Multimeter     225-8266 Ammeter Tool Gp     1U-6602 Photo-Tachometer     4C-4911 Battery Load Tester…

Illustration 1 g00584419 Typical 24 volt starting circuit (1) Test point (2) Test point (3) Test point (4) Test point (5) Test point (X) Hold-in…

Illustration 1 g01717876