With an increase in temperature, switch will operate (trip) at … 215°F(103°C) With a decrease in temperature, switch will operate (reset) at … 203°F(95°C)
Author: sam
Endplay between washer (2) and timing advance unit (1) … 0.08 to 0.94 mm (.003 to .037 in) (3) Torque for screw … 7.9 ±…
7C9007 Shown 7C9007 120 VAC, 750 W … 6.3A 124-0678 240 VAC, 1000 W … 4.2A 7E6250 Thermostat Setting (Non-Adjustable) … 66°C (150°F)
1N9770 … 12.5A 6T3644 … 20A
Alternator (1) Pulley nut. (2) Fan. (3) Shield. (5) Drive frame. (6) Rear frame. (7) Rotor. (8) Bearing. (9) Screws – three. (10) Retainer. (11)…
Assembly Procedure Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry.…
Disassembly Procedure Start By: Remove the alternator. Refer to Disassembly and Assembly, “Alternator – Remove” for the machine that is being serviced. Note: Cleanliness is…
Assembly Procedure Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry.…
Disassembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A …
20-SI (1) BAT terminal nut. (2) GND terminal screw. (3) Through bolts. (4) Pulley nut.