Installation Procedure 1.Position water pump belt tightener (3) and install V-belt (2) on the pulley of water pump belt tightener (3) . 2.Install bolts (1)…
Author: sam
Assembly Procedure Table 1 Required Tools Tool Part Number Part Description Qty A 1P-1855 Retaining Ring Pliers 1 B 1P-0510 Driver Gp 1 C 9S-3263…
Removal Procedure 1.Use a breaker bar to release the tension on belt tensioner (1). Remove the drive belt. 2.Remove bolt (2) and belt tensioner (1)…
Installation Procedure 1.Position idler pulley (3). Install bolt (2) and tighten bolt (2) to a torque of 55 ± 10 N·m (40 ± 7 lb…
Assembly Procedure 1.Use Tooling (B) to install one retaining ring (2) in idler pulley (4) . 2.Install bearings (3) in idler pulley (4) with Tooling…
Disassembly Procedure Start By: A.Remove the idler pulley. Refer to Disassembly and Assembly, “Idler Pulley – Remove”. 1.Remove spacer (1) and bolt (5) from idler…
1.Remove cover (1) from the idler pulley. Cover (1) will be damaged during removal. 2.Remove bolt (2) and idler pulley (3) .
Idler Pulley Assembly (1) Distance from back of plate assembly (3) to middle of pulley (4) … 26.0 ± 0.3 mm (1.02 ± 0.012 in)…
Start By: A.Remove the air compressor. Removal Procedure 1.Temporarily install air compressor (1) with bolts (2) . Remove cover plate (3) 2.Loosen nut (2) .…
Removal Procedure 1. Remove the air pressure from the air tank and drain the coolant from the cooling system. Remove the air line from the…