1. Install the sea water pump and nuts. 2. Connect the sea water inlet line. 3. Connect the sea water outlet line.
Author: sam
1. Disconnect sea water inlet line (4). 2. Disconnect sea water outlet line (2). 3. Remove four nuts (1) and remove sea water pump (3).
NOTE: Put a thin layer of clean engine oil on all O-ring seals and the bores of each adapter. NOTE: Inspect all O-ring seals and…
1. Remove coolant from the engine. 2. Remove four bolts (1) and turn tube assembly (2) from aftercooler. 3. Remove four bolts (3) and gasket…
Lip type seals are used to seal the bearing supported sealing journals and the contact surfaces in an oil compartment. Sealing Journal Storage Best storage…
(1) Torque for hose clamps … 2.3 ± 0.2 N·m (20 ± 2 lb in) (2) Torque for bolts … 3.4 ± 0.5 N·m (30…
Visually inspect the filter for damage and failures in the filter seal, gasket, and outer cover before cleaning the filters. Do not use any failed…
Note: The air filter indicators need annual replacement. Use an air filter restriction indicator (Illustrations 6 and 7) to determine when a filter should be…
Caterpillar Products:Commercial Engines 3500B and 3500C Caterpillar Products:Machine Engines with Electronic Unit Injectors 3500 Series Caterpillar Products:Machine Engines with Mechanical Unit Injectors 3500 Series Caterpillar…
An inspection/check of your turbocharger will minimize unscheduled downtime and reduce the chance for potential damage to other engine parts. Removal and Installation For removal…