NOTE: The same tools are needed for the fuel ratio control adjustment that were used for the fuel setting. Make reference to Fuel Setting for…
Author: sam
The procedure that follows for fuel setting can be done with the housing for the fuel injection pumps either on or off the engine. NOTE:…
The procedure that follows for fuel setting can be done with the housing for the fuel injection pumps either on or off the engine. NOTE:…
8T5300 Timing Indicator Group (1) 8T5250 Engine Timing Indicator. (2) 5P7366 Cable Assembly. (3) 6V2197 Magnetic Transducer. (4) 5P7362 Cable. (5) 6V2199 & 6V3093 Transducer…
Checking Fuel Injection Pump Timing; On Engine The timing of the fuel injection pump can be checked and changed if necessary, to make compensation for…
No. 1 piston at top center (TC) on the compression stroke is the starting point for all timing procedures. Fitting And Bolt Location (1) Fitting.…
When fuel injection pumps, sleeves and lifters are removed from the fuel injection pump housing, keep the parts of each fuel injection pump together so…
Fuel from the fuel injection pumps goes to the fuel injection nozzles through the fuel injection lines. When fuel injection lines are disconnected or removed,…
An easy check can be made to find the cylinder that runs rough (misfires) and causes black smoke to come out of the exhaust pipe.…
A problem with the components that send fuel to the engine can cause low fuel pressure. This can decrease engine performance. 1. Check the fuel…