Remove Crankshaft Pulley (Industrial Engine) 1. Remove hub retaining bolt (1) and washer (3) from end of crankshaft. Install a spacer (2), washer (3) and…
Author: sam
Disassemble Fan Drive (Industrial Engine) start by: a) remove fan and fan drive 1. Remove adapter (1). 2. Remove hub (2) from pulley (8). Remove…
Remove Fan And Fan Drive (Industrial Engine) 1. Remove fan guard (1) after bolts (2) are removed. 2. Remove bolts that hold fan (3) to…
Remove Water Temperature Regulator (Industrial Engine) 1. Drain the coolant from the cooling system. 2. Remove bolts (2) and pipe (1) from the cylinder head.…
Remove Aftercooler (Marine Engine) 1. Remove coolant from the engine. 2. Remove four bolts (1) and turn tube assembly (2) from aftercooler. 3. Remove four…
Remove Expansion Tank And Heat Exchanger (Marine Engine) 1. Remove coolant from the engine cooling system. 2. Remove the sea water from the system. 3.…
Remove Heat Exchanger (Marine Engine) 1. Remove coolant from the engine cooling system. 2. Remove the sea water from the system. 3. Remove bolts (2)…
Disassemble Oil Filter Base start by: a) remove engine oil cooler, oil filter base* and torque converter oil cooler as a unit NOTE: The oil…
Remove Engine Oil Cooler (Industrial Engine) 1. Remove the coolant from the cooling system. 2. Remove two bolts (3) that hold oil cooler to the…
Disassemble Fuel Injection Pump Housing start by: a) separation of governor from fuel injection pump housing b) remove fuel transfer pump c) remove fuel injection…