Removal Procedure Start By: Remove the fuel transfer pump. Refer to Disassembly and Assembly, “Fuel Transfer Pump – Remove”. Remove the injection actuation pressure control…
Tag: injector
Installation Procedure Use Tooling (B) to clean the sleeve of the unit injector. Illustration 1 g01233010 Install new O-ring seal (3) on unit injector (2)…
Removal Procedure Start By: Remove the rocker arms and the pushrods. Refer to Disassembly and Assembly, “Rocker Shaft and Pushrod – Remove”. Illustration 1 g00644454…
Hydraulic Electronic Unit Injector (1) Poppet valve. (2) Lower seat (poppet valve). (3) Entry port (high pressure oil). (4) Solenoid return spring. (5) Solenoid.…
System Operation Diagnostic Codes Functional Test
System Operation Schematic ECM Pin Locations Diagnostic Codes Functional Test
System Operation Schematic ECM connetion pins Diagnostic Codes Functional Test
System Operation Schematic ECM Pin Locations Diagnostic Codes Functional Test
Removal Procedure Start By: A.Remove the unit injector. Refer to Disassembly and Assembly, “Unit Injector – Remove”. 1.Use Tooling (A) to remove unit injector sleeve…