1. Fasten the dial indicator as shown so the anvil of the indicator will touch the bore of the flywheel housing. 2. With the dial…
Tag: 3100 HEUI
8T5096 Dial Indicator Group Installed (Typical Example) If any method other than given here is used, always remember bearing clearance must be removed to get…
1. Check coolant level in the cooling system. 2. Look for leaks in the system. 3. Look for bent radiator fins. Be sure that air…
Water Pump Group (1) Port (alternate heater supply). (2) Port (for engine diagnosis). (3) Ports (heater return). The pressure rise (increase in pressure or pressure…
1. Remove the regulator from the engine. 2. Heat water in a pan until the temperature is 94°C (202°F). Move the water around in the…
Check the accuracy of the water temperature gauge if either of the conditions that follow are found: * The gauge reads normal, but the engine…
To test the radiator and cooling system for leaks, use the procedure that follows: 1. Remove the pressure cap from the radiator. 2. Make sure…
One cause for a pressure loss in the cooling system can be a defective seal on the radiator pressure cap. Typical Schematic Of Pressure Cap…
Crankcase Oil Level Check the level of the oil in the crankcase. Add oil if needed. It is possible for the oil level to be…