Indicates to the ECM the type of transmission installed in the vehicle. It is also used by the ECM to determine how to read inputs…
Tag: 3100 HEUI
Minimum engine rpm.
Maximum engine rpm when the engine is under load. The engine will still achieve Rated RPM under no load conditions.
Lower Gears Engine RPM Limit (3116 Only) Engine rpm limited below “Lower Gears Engine RPM Limit (Low Gear #1 Turn Off Speed)”. The engine will…
PTO Installation and Application Manual, SEHS9857 is available to further explain these features and how to install them. Torque Limit Torque limit of the engine…
Idle/PTO Vehicle Speed Limit Maximum vehicle speed for setting or maintaining a set engine rpm in either idle or PTO mode. Idle mode is entered…
Low Cruise Control Speed Set Limit The lowest vehicle speed at which cruise control can be used. Programming this parameter to the maximum value disables…
Vehicle Speed Calibration The ECM uses this value to scale the vehicle speed signal into miles per hour. It is programmed in pulses per mile…
Customer Specified Parameters allow the truck owner to influence how a driver operates the vehicle. Some parameters may affect engine operation in ways an inadequately…
System Configuration Parameters affect emissions or rated power of the engine. They are programmed at the factory and would normally never need to be changed…