Clean the cooling system and flush the cooling system before the recommended maintenance interval if the following conditions exist: The engine overheats frequently. Foaming…
Author: sam
Clean the cooling system and flush the cooling system before the recommended maintenance interval if the following conditions exist: The engine overheats frequently. Foaming…
Inspection Belt tension should be checked initially between the first 20 to 40 hours of engine operation. Check the tension when the engine is stopped.…
When the engine is not run for long periods of time or when the engine is run for short periods, the batteries may not fully…
Caterpillar recommends a scheduled inspection of the alternator. Inspect the alternator for loose connections and proper battery charging. Inspect the ammeter (if equipped) during engine…
Moisture and sediment in the air starting system can cause the following conditions: Freezing Corrosion of internal parts Malfunction of the air starting system…
To ensure that the air shutoff valve always shuts down when the engine ingests gaseous fumes, perform the test below at each oil change. A…
Note: Adjust the frequency of cleaning according to the effects of the operating environment. Inspect the aftercooler for these items: damaged fins, corrosion, dirt, grease, insects,…
Remove the core. Refer to the Service Manual for the procedure. Turn the aftercooler core upside-down in order to remove debris. NOTICE Do…
NOTICE Because the strength of the frame may decrease, some manufacturers do not recommend welding onto a chassis frame or rail. Consult the OEM…