Using FT1984 Air-to-Air Aftercooler Test Group (1) Regulator and valve assembly. (2) Nipple. (3) Relief valve. (4) Tee. (5) Coupler. (6) Aftercooler. (7) Dust plug.…
Author: sam
Normal inlet manifold pressure with high exhaust temperature can be caused by cooler core fin blockage. Clean the cooler core fins, see Visual Inspection for…
Temperature of an exhaust manifold port, when the engine runs at low idle speed, can be an indication of the condition of a unit injector,…
The efficiency of an engine can be checked by making a comparison of the pressure in the inlet manifold with the specifications given in the…
Engine speed measurement is available on the display screens of the electronic service tool (ECAP or ET) 6V3121 Multitach Group The 6V3121 Multitach Group can…
3100 HEUI Diesel Truck Engine Cylinder And Valve Location
Top Center (TC) Bolt Location (Typical Example) (1) Top center (TC) bolt. (2) Timing hole. (3) Flywheel housing. NOTE: Depending on engine application, the timing…
If the engine fuel system is run dry, fill the fuel tank and prime (purge) the fuel system to remove air bubbles from the system.…
NOTE: 5P2720 Self-Sealing Probe Adapter and 5P2718 Pressure Probe may be used with the tools needed, to allow installation of pressure probes in the future.…
A problem with the components that send fuel to the engine can cause low fuel pressure. This can decrease engine performance. Fuel System Fuel System…