259D Skid Steer Loaders Machine Systems – Hydraulic Oil Filter Base – Remove and Install

Removal Procedure


Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.

Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.

Dispose of all fluids according to local regulations and mandates.

    Illustration 1g03381935

  1. Disconnect harness assembly (1), hose assemblies (4), and fuel filter (5). Remove bolts (2) and hydraulic oil filter base (3) .

Installation Procedure

  1. Install hydraulic oil filter base (3) in the reverse order of removal.

Leave a Reply

Your email address will not be published. Required fields are marked *