259D Skid Steer Loaders Machine Systems – Gear Motor (Fan) – Remove and Install

Removal Procedure

  1. Refer to Operation and Maintenance Manual, "Radiator Tilting".



    Illustration 1g02799516

  1. Disconnect hose assemblies (1) and hose (2) .



    Illustration 2g02799558

  1. Disconnect harness assembly (3) .



    Illustration 3g02799576

  1. Support gear motor (4) with suitable blocking. Remove bolts (5). Remove gear motor (4), the fan guard, and the fan as a unit.



    Illustration 4g02799617

  1. Remove bolt (6). Remove fan (7) and the hub.



    Illustration 5g02799618

  1. Remove bolts (8). Remove gear motor. (4) from the fan guard.

Installation Procedure

  1. Install gear motor (4) in the reverse order of removal.

    1. Tighten bolt (6) to a torque of 30 ± 7 N·m (22 ± 5 lb ft).

Leave a Reply

Your email address will not be published. Required fields are marked *