259D Skid Steer Loaders Machine Systems – Coupler Cylinder – Remove and Install

Removal Procedure




    Illustration 1g02897899

  1. Disconnect harness assembly (1) .



    Illustration 2g02897896

  1. Remove guard (2) .



    Illustration 3g02897897



    Illustration 4g02897898



    Illustration 5g03746404

    For models with this orientation the coupler cylinder is attached with a bolt and nut.

  1. Remove cotter pin (3) , pin (4) , cotter pin (5) , and pin (6) . Remove coupler cylinder (7) from the quick coupler.



    Illustration 6g02917772

  1. Remove bolts (8) to remove plate (9) .



    Illustration 7g02917780

  1. Use a suitable prybar to articulate link (10) and spring (11) away from the retaining block (X) in the direction indicated.



    Illustration 8g02917836

  1. Remove cotter pin (12) and pin (13) .



    Illustration 9g02917838

  1. Remove lever assembly (14) .

Installation Procedure

  1. Install coupler cylinder (7) in the reverse order of removal.

Leave a Reply

Your email address will not be published. Required fields are marked *