259D Skid Steer Loaders Machine Systems – Accumulator Manifold and Solenoid Mounting (Pilot Shutoff) – Remove and Install

Removal Procedure

Start By:

  1. Release the hydraulic system pressure.
  2. Tilt the cab.



    Illustration 1g02827876

  1. Disconnect harness assemblies (1) , hose assemblies (2) , and hose (3) .



    Illustration 2g02827896

  1. Remove bolts (4) to remove accumulator manifold and solenoid mounting (5) .



    Illustration 3g02827916

  1. Remove accumulator (6) .

  1. Remove bolts (7) to remove retainer (8) . Remove solenoid (9) .



    Illustration 4g02828020

  1. Remove O-rings seals (10) from solenoid (9) .

Installation Procedure

  1. Install accumulator manifold and solenoid mounting (5) in the reverse order of removal.

    1. Tighten bolts (7) to a torque of 4 ± 0.5 N·m (35 ± 4 lb in).

    1. Tighten accumulator to a torque of 30 ± 4 N·m (22 ± 3 lb ft).

Leave a Reply

Your email address will not be published. Required fields are marked *