3208 INDUSTRIAL ENGINE ATTACHMENTS – Power Take-Off Clutch

2N1373 CLUTCH

A force (F) of 118 to 156 lbs. (525 to 695 N) must be necessary to engage the clutch. The force must be at 90° to the clutch lever and 13.4 in. (340 mm) from the center of the lever shaft.

Torque the bolt that holds the clutch lever on the shaft to … 75 lb.ft.(100 N·m)

(1) Torque for hub nut … 30 lb.ft.(40 N·m) + 120° to 150°

(2) Torque for bolt that holds the lock in place … 21 lb.ft.(26 N·m)

(3) End clearance for shaft … .004 to .007 in.(0.10 to 0.18 mm)

(4) Thickness of clutch plate (new) … .433 to .443 in.(11.00 to 11.25 mm)

(5) Torque for two bolts that hold the yoke to the shaft … 38 lb.ft.(51 N·m)

(6) Torque for two bolts that hold the collar assembly together … 30 lb.ft.(40 N·m)