Remove And Install Lifters (With Rollers)
start by:
a) remove cylinder heads
1. Remove valve lifters (1).
2. Put identification on each lifter as to its location in the engine for installation purposes.
3. Put the valve lifters in clean engine oil before installation.
4. Put lifter (2) and spring (3) in position so the tab on the spring is within an area .190 in. (4.8 mm) either side of the centerline of the cam and valve lifter bores.
NOTE: If necessary turn the camshaft so lifters can be pushed into correct position.
end by:
a) install cylinder heads
Remove And Install Lifters
start by:
a) remove cylinder heads
1. Remove valve lifters (2) with magnet (1).
2. Put identification on each lifter as to its location in the engine for installation purposes.
3. Put clean engine oil on the valve lifters and camshaft lobes.
4. Install the valve lifters (2) in their original positions in the cylinder block.
end by:
a) install cylinder heads
