Removal Procedure
Start By:
A.Remove the camshaft. Refer to Disassembly and Assembly, “Camshaft – Remove”.
1.Wrap the camshaft with a protective covering in order to prevent damage to the camshaft.
2.Place camshaft (2) and camshaft gear (1) in a suitable press. Press camshaft (2) from camshaft gear (1) .
3.If necessary, remove the key (3) from the camshaft.
Installation Procedure
1.Raise the temperature of camshaft gear (1) .
2.Align key (3) in the camshaft with the groove (keyway) in the camshaft gear.
3.Install camshaft gear (1) on the end of camshaft (2) .
End By: Install the camshaft. Refer to Disassembly and Assembly, “Camshaft – Install”.