A.Remove the belt tensioner. Refer to Disassembly and Assembly, “Belt Tensioner – Remove and Install”.
1.Drain the coolant from the cooling system into a suitable container for storage or disposal.
Illustration 1 g00614170
2.Remove water pump V-belt (1) .
3.Loosen hose clamps (4) and remove hose (3) .
4.Disconnect hose assembly (2) from the water pump elbow.
Illustration 2 g00614173
5.Remove bolts (6) that hold water pump (5) to the front of the engine. Remove water pump (5) .
6.Remove the O-ring seals from water pump (5), if necessary.