3116 and 3126 Truck Engines Piston Cooling Jets – Remove and Install

Removal Procedure
Start By:

A.Remove the engine oil pan. Refer to Disassembly and Assembly, “Engine Oil Pan – Remove and Install”.

1.Remove bolt (2) and piston cooling jet (1) from each cylinder.

Installation Procedure

1.Position piston cooling jet (1) in the cylinder block. Install bolt (2) . Tighten the bolt to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
End By: Install the engine oil pan. Refer to Disassembly and Assembly, “Engine Oil Pan – Remove and Install”.

Categories: 3126 | Tags: , , | Leave a comment

Leave a Reply

Required fields are marked *