Removal Procedure
Start By:
A.Remove the fuel filter base. Refer to Disassembly and Assembly, “Fuel Filter Base – Remove and Install”.
B.Remove the unit injectors. Refer to Disassembly and Assembly, “Unit Injector – Remove”.
C.Remove the water temperature regulator housing. Refer to Disassembly and Assembly, “Water Temperature Regulator Housing – Remove and Install”.
D.Remove the inlet manifold. Refer to Disassembly and Assembly, “Air Inlet Manifold – Remove”.
E.Remove the exhaust manifold. Refer to Disassembly and Assembly, “Exhaust Manifold – Remove and Install”.
Note: For information on the reusability of the cylinder head, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8218, “Specifications for Cylinder Head Assemblies 3114, 3116, and 3126 Engines” and Guideline For Reusable Parts And Salvage Operations, SEBF8162, “Procedure to Measure and Salvage Cylinder Head Assemblies and Related Components”.
1.Attach a suitable lifting device to the cylinder head.
2.Remove bolts (1) and (2) that hold the cylinder head to the cylinder block. Carefully remove the cylinder head from the cylinder block.
3.Remove cylinder head gasket (3) .
