Installation Procedure Illustration 1 g00644655 Use Tooling (A) in order to install the injection actuation pressure control valve on the unit injector hydraulic pump. Tighten…

Assembly Procedure Clean the injection actuation pressure control valve and the components for the injection actuation pressure control valve. Illustration 1 g01011197 (1) O-ring seal…

Disassembly Procedure Start By: Remove the injection actuation pressure control valve. Refer to Disassembly and Assembly, “Injection Actuation Pressure Control Valve – Remove”. Illustration 1…

Removal Procedure Illustration 1 g00644654 Disconnect harness assembly (2) from injection actuation pressure control valve (1) . Remove nut (3), the spacer, and the solenoid…

(1) Injection actuation pressure control valve. Final installation, tighten to a torque of … 50 ± 5 N·m (37 ± 4 lb ft) (2) Spacer.…