Tag Archives for oil pump

3116 and 3126 Truck Engines Engine Oil Pump – Install

Installation Procedure Note: Ensure that the mounting surfaces for the engine oil pump are thoroughly clean. Illustration 1 g01029320 Install the O-ring seal. Position engine oil pump (3) on the cylinder block. Install bolts (1) and bolt (2) . End … Continue reading

27. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Engine Oil Pump – Assemble

Assembly Procedure Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8167, “Reconditioning Procedures 3114 and 3116 Engines”. Ensure that all of the parts of the engine oil pump … Continue reading

27. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Engine Oil Pump – Disassemble

Disassembly Procedure Start By: Remove the engine oil pump. Refer to Disassembly and Assembly, “Engine Oil Pump – Remove”. Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8167, … Continue reading

27. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Engine Oil Pump – Remove

Removal Procedure Start By: Remove the engine oil pan. Refer to Disassembly and Assembly, “Engine Oil Pan – Remove and Install”. Note: For information on the reusability of the engine oil pump, refer to Guideline For Reusable Parts And Salvage … Continue reading

27. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Oil Pump

Section View Through Pump Gears (Typical Example) Section View Through Bypass Valve (1) Distance between outside face of gear and joint face of body … 43.00 ± 0.25 mm (1.693 ± 0.010 in) (2) Length of gears … 33.000 ± … Continue reading

27. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Hydraulic Pump Group (Fuel Transfer And High Pressure Oil Pumps)

(1) Fuel pump outlet. Final installation into pump, tighten to a torque of … 35 ± 3 N·m (26 ± 2 lb ft) (2) Fuel pump inlet. Final installation, tighten to a torque of … 35 ± 3 N·m (26 … Continue reading

26. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , | Leave a comment