Oil Filter | Caterpillar Engines Troubleshooting

Tag Archives for oil filter

3116 and 3126 Truck Engines Engine Oil Filter Bypass Valve – Remove and Install

Removal Procedure Illustration 1 g00630032 Illustration 2 g00629985 Remove plug (1) and the O-ring seal from the engine oil filter base. Remove valve spring (2) and bypass valve (3) from the engine oil filter base. Installation Procedure Illustration 3 g00630032 … Continue reading

27. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Engine Oil Filter Base – Install

Installation Procedure Illustration 1 g01026328 Illustration 2 g01185803 Position the gasket and engine oil filter base (3) over the engine oil cooler. Install the bolts that hold engine oil filter base (3) to the cylinder block. Tighten the bolts in … Continue reading

27. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Engine Oil Filter Base – Assemble

Assembly Procedure Illustration 1 g01011627 Install O-ring seals (5) onto plugs (1) and (3). Install valves (6) and springs (4) . Illustration 2 g01011623 Install plugs (1) and (3) onto oil filter base (2) . End By: Install the engine … Continue reading

27. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Engine Oil Filter Base – Disassemble

Disassembly Procedure Start By: Remove the engine oil filter base. Refer to Disassembly and Assembly, “Engine Oil Filter Base – Remove”. Illustration 1 g01011623 Remove plugs (1) and (3) from oil filter base (2) . Illustration 2 g01011627 Remove springs … Continue reading

26. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Engine Oil Filter Base – Remove

Removal Procedure Note: Remove the turbocharger, if necessary. Refer to Disassembly and Assembly, “Turbocharger – Remove”. Illustration 1 g01026328 Remove oil filter assembly (1) with Tooling (A) . Disconnect tube assembly (2) from the elbow assembly. Remove engine oil filter … Continue reading

26. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

3100 HEUI Truck Engine Oil Filter Base

Typical Example (1) Oil filter bypass valve to open at … 125 ± 30 kPa (18 ± 4.5 psi) 9L9188 Spring for bypass valve: Outside diameter … 11.2 mm (0.44 in)Free length … 57.9 mm (2.28 in)Assembled length … 43.2 … Continue reading

26. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment