Tag Archives for inlet manifold

3116 and 3126 Truck Engines Inlet Manifold Pressure

Normal inlet manifold pressure with high exhaust temperature can be caused by cooler core fin blockage. Clean the cooler core fins, see Visual Inspection for the cleaning procedure to use. Low inlet manifold pressure and high exhaust manifold temperature can … Continue reading

25. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , , | Leave a comment

3116 and 3126 Truck Engines Measurement Of Pressure In Inlet Manifold

The efficiency of an engine can be checked by making a comparison of the pressure in the inlet manifold with the specifications given in the TIM (Technical Marketing Information). This test is used when there is a decrease of horsepower … Continue reading

25. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , , | Leave a comment

3116 and 3126 Truck Engines Soot In The Inlet Manifold

Probable Cause: * Engine Design * Defective Valve Or Seat 1. Engine design: On diesel engines a small amount of soot is normal. This is due to the design characteristics of the engine. Valve overlap allows the intake to open … Continue reading

25. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , , | Leave a comment

3116 and 3126 Truck Engines Inlet Manifold – Install

Installation Procedure 1.Install the new gasket on the cylinder head. 2.Remove air inlet manifold (2) and bolts (1) . 3.Install bolts (1). Tighten the bolts to a torque of 28 ± 7 N·m (21 ± 5 lb ft). End By: … Continue reading

15. July 2017 by samuel07042012
Categories: 3126 | Tags: , , | Leave a comment

3116 and 3126 Truck Engines Inlet Manifold – Remove

Removal Procedure Start By: A.Remove the valve mechanism cover. Refer to Disassembly and Assembly, “Valve Mechanism Cover – Remove and Install”. 1.Disconnect air inlet piping from the turbocharger to the aftercooler, if necessary. 2.Remove bolts (1), air inlet manifold (2) … Continue reading

15. July 2017 by samuel07042012
Categories: 3126 | Tags: , , | Leave a comment