Tag Archives for cooling jet

3116 and 3126 Truck Engines Piston Cooling Jets – Remove and Install

Removal Procedure Start By: A.Remove the engine oil pan. Refer to Disassembly and Assembly, “Engine Oil Pan – Remove and Install”. 1.Remove bolt (2) and piston cooling jet (1) from each cylinder. Installation Procedure 1.Position piston cooling jet (1) in … Continue reading

17. July 2017 by sam
Categories: 3126 | Tags: , , | Leave a comment

3116 and 3126 Truck Engines Piston Cooling Jet

Check piston cooling jets by inserting a 1.3 mm (0.05 in) diameter drill rod into jet. Rods must pass through a 5.0 mm (0.20 in) diameter circle in location (A) and a 13.0 mm (0.51 in) diameter circle in location … Continue reading

17. July 2017 by sam
Categories: 3126 | Tags: , , | Leave a comment