Tag Archives for belt

3116 and 3126 Truck Engines Belt Tension Chart

26. July 2017 by samuel07042012
Categories: 3126 | Tags: , , , | Leave a comment

3116 and 3126 Truck Engines Belt Tightener – Install

Installation Procedure 1.Position water pump belt tightener (3) and install V-belt (2) on the pulley of water pump belt tightener (3) . 2.Install bolts (1) that hold water pump belt tightener (3) to the timing gear housing. 3.Adjust the tension … Continue reading

16. July 2017 by samuel07042012
Categories: 3126 | Tags: , , | Leave a comment

3116 and 3126 Truck Engines Belt Tightener – Assemble

Assembly Procedure Table 1 Required Tools     Tool     Part Number     Part Description     Qty     A     1P-1855     Retaining Ring Pliers     1     B     1P-0510 … Continue reading

16. July 2017 by samuel07042012
Categories: 3126 | Tags: , , | Leave a comment

3116 and 3126 Truck Engines Belt Tightener – Disassemble

Disassembly Procedure Table 1 Required Tools     Tool     Part Number     Part Description     Qty     A     1P-1855     Retaining Ring Pliers     1     B     1P-0510 … Continue reading

16. July 2017 by samuel07042012
Categories: 3126 | Tags: , , | Leave a comment

3116 and 3126 Truck Engines Belt Tightener – Remove

Removal Procedure 1.Remove bolts (1) that hold water pump belt tightener (3) to the timing gear housing. 2.Remove V-belt (2) from the pulley of water pump belt tightener (3). Remove water pump belt tightener (3) .

16. July 2017 by samuel07042012
Categories: 3126 | Tags: , , | Leave a comment

3116 and 3126 Truck Engines Belt Tensioner – Remove and Install

Removal Procedure 1.Use a breaker bar to release the tension on belt tensioner (1). Remove the drive belt. 2.Remove bolt (2) and belt tensioner (1) . Installation Procedure 1.Position belt tensioner (1) on the cylinder block. Install bolt (2) . … Continue reading

16. July 2017 by samuel07042012
Categories: 3126 | Tags: , , | Leave a comment

3116 and 3126 Truck Engines Water Pump Belt Tightener

Idler Pulley Assembly (1) Distance from back of plate assembly (3) to middle of pulley (4) … 26.0 ± 0.3 mm (1.02 ± 0.012 in) (2) Distance from back of plate assembly (3) to back of pulley (4) … 16.0 … Continue reading

16. July 2017 by samuel07042012
Categories: 3126 | Tags: , , | Leave a comment