42-MT | Caterpillar Engines Troubleshooting

Tag Archives for 42-MT

42-MT Starting Motor Assemble

Illustration 1 g00810589 1.Put SAE 20W oil on all bushings, seals and oil wicks. 2.Put field winding coil (24) and pole shoes (25) in position in the starting motor housing. Put 9s-3263 Thread Lock Compound on the threads of screws … Continue reading

24. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

42-MT Starting Motor Disassemble

Disassemble the Starting Motor Note: The disassembly and assembly that follows is of the 24 volt starting motor. The 12 volt is similar. Illustration 1 g00810559 1.Disconnect wire assembly (4) from solenoid (1). Disconnect motor terminal connector (3) from the … Continue reading

23. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

42-MT Starting Motors General Information

Illustration 2 g00801373 42-MT Cross section view (1) Nut (Battery) (2) Solenoid Mounting Screws (3) Pinion (4) Pinion Drive Housing Bolts (5) Shift Lever Housing Bolts (6) Field Winding Screws (7) Laminated Core (8) Brush (9) Commutator (10) Ground Terminal … Continue reading

22. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

42-MT Starting Motors

The identification tag on the starting motor displays two numbers: Part Number and Consist Number. The Part Number is used to order a complete starting motor. The Consist Number is used for identifying the specific starting motor and acquiring serviceable … Continue reading

22. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment