41-MT | Caterpillar Engines Troubleshooting

Tag Archives for 41-MT

37-MT and 41-MT Starting Motor Assemble

Assemble the Starting Motor Illustration 1 g00810281 1.Put SAE 20W oil on all bushings, seals and oil wicks. 2.Put field winding coil (29) and pole shoes (30) in position in the starting motor housing. Put 9s-3263 Thread Lock Compound on … Continue reading

24. July 2017 by sam
Categories: 3126 | Tags: , , , , | Leave a comment

37-MT and 41-MT Starting Motor Disassemble

Disassemble the Starting Motor Start By: A.Remove the starting motor from the machine. Note: The disassembly of the 12 volt starting motor is similar to the disassembly of the 24 volt starting motor. Illustration 1 g00810179 1.Disconnect and remove shunt … Continue reading

23. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment

37-MT and 41-MT Starting Motors General Information

Illustration 1 g00782868 37-MT and 41-MT Cross section view (1) Nut (Battery) (2) Solenoid Mounting Screws (3) Pinion (4) Pinion Drive Housing Bolts (5) Shift Lever Housing Bolts (6) Field Winding Screws (7) Laminated Core (8) Rear Housing Bolts (9) … Continue reading

22. July 2017 by sam
Categories: 3126 | Tags: , , , , | Leave a comment

41-MT Starting Motors

The identification tag on the starting motor displays two numbers: Part Number and Consist Number. The Part Number is used to order a complete starting motor. The Consist Number is used for identifying the specific starting motor and acquiring serviceable … Continue reading

22. July 2017 by sam
Categories: 3126 | Tags: , , , | Leave a comment